Commercial property finance
How lenders treat industrial property, and what that means for a warehouse purchase.
Industrial property finance in Australia is read from the lease, the tenant, the location and the permitted use, alongside the price. CBRE measured Melbourne industrial vacancy at 4.7% in the first half of 2026, against 3.2% nationally, while the Property Council put national office vacancy at 16.1% for the six months to July 2026. This is how that difference shows up when you are buying a warehouse.
A lender reads the lease, the tenant, the location and the use.
A warehouse purchase is industrial property finance, and the contract price is one line of the file. The lender wants to know who pays the rent, how long that income lasts, what the building is allowed to be used for, and whether another occupier could use it if this tenant left. Location sits inside that reading, because access and neighbours change who can occupy the building. A warehouse in an established industrial precinct, with truck access and neighbouring users, is a different file from a building on a road that has neither the access nor the neighbours.
The papers that carry this are the lease, the rent schedule, any incentive or a period with no rent, the planning permit or occupancy certificate, and a valuation that states the value with the tenant in place and the value if the building is empty. We ask for those before a file goes to a lender. A missing rent schedule is one of the ordinary things that stalls a warehouse approval.
An owner-occupier and an investor are assessed on different income.
If you will trade from the warehouse, the lender reads the profit of the business that will occupy it. If you are buying it to hold, the lender reads the lease, the tenant and the rent. The same building can support a different loan on those two paths, with a different set of documents and a different loan-to-value ratio. We have set that split out in full, including how an SMSF or a trust buyer is read, in our comparison of an owner-occupier and an investor commercial property loan.
How do Australian lenders assess a warehouse or industrial property loan, and how is that different from office or retail?
Vacancy, how specialised the building is, what else it could be used for, and whether the site has an environmental history. Those four points are where a warehouse loan parts company with an office loan or a shop loan. The table is the short version. The paragraphs under it are the detail a credit file actually turns on.
| What the lender reads | Warehouse or industrial | Office | Retail |
|---|---|---|---|
| Income | Rent under the lease, or the business profit if you occupy the building | Rent, and how much of the floor is actually let | Rent, and how the shop trades in that strip or centre |
| Vacancy around it | Melbourne 4.7% (CBRE, first half 2026). Knight Frank measured 5.0% in June 2026 | National 16.1% (Property Council, six months to July 2026) | Set by the centre or the strip. The lender still reads the lease and the tenant |
| How specialised it is | Clearance, power, hardstand and the permitted use can limit the next tenant | A plain floor suits many tenants. A heavily fitted floor is harder to re-let | A standard shop is often easier to re-let, until the fitout serves one use only |
| If this tenant leaves | Another warehouse user, a split of the building, or a use the planning scheme allows | Another office occupier, often after a period of vacancy | Another retailer, or a change of use that needs a permit |
| Environment | Past industry, fuel or chemical storage can leave contamination, and lenders ask about it | Rarely the question that holds the file | Fuel sales and some food uses can raise the same question |
| What slows the file | A short lease, a specialised fitout, a late environmental report, or a valuation under the price | Vacancy, and a short remaining lease | Tenant quality, and incentives that reduce the rent a lender will count |
Vacancy is the clearest split in the numbers. CBRE's Industrial and Logistics Vacancy Report for the first half of 2026, dated 30 June 2026, left national vacancy unchanged at 3.2% and Melbourne unchanged at 4.7%. Knight Frank's Melbourne industrial report for the June quarter 2026 uses a different sample and put vacancy at 5.0%, with prime yields averaging 6.0%. The office figures describe a different market. The Property Council's release of 6 August 2026 put national office vacancy at 16.1%, up from 15.8% over the half, with CBD vacancy at 14.9%. What that vacancy does to a loan against an office building is covered in our note on lending against office.
A specialised warehouse is harder to re-let than a plain office floor. High clearance, a heavy power supply, a cold store or a production line can be exactly what one tenant needs and of little use to the next. A standard shop often sits between the two, until the fitout is built for a single operator. Alternative use is the question underneath all three. If the tenant leaves, can the building be leased again as a warehouse, split, or turned to something else the planning scheme allows?
Environmental questions come up on industrial land more often than on an office floor. EPA Victoria's guide for business (publication 2010, July 2021) describes potentially contaminated land, in the planning scheme's words, as land used for industry, mining, or storing chemicals, gas, wastes or liquid fuel. A lender taking a mortgage over a warehouse with that kind of history will want to know whether the soil and groundwater have been assessed. A completed report keeps the file moving. An open question about the site is one of the things that slows an approval, and it can change the price a lender will support.
Buyers ask about an 80% LVR on commercial property. Lenders do not publish one maximum.
Buyers of a warehouse often ask what share of the price a lender will fund. There is no single maximum we can quote, and no lender publishes one ratio that covers every warehouse. The limit moves with the lease, the tenant, how specialised the use is, and what the building could earn if it had to be re-let. The deposit is the gap between the price and the amount a lender will advance, plus the costs of buying, duty included. Where an owner-occupier limit and an investor limit diverge, the comparison linked above is the place to read it. Where a bank comes back short, the usual reasons, and what changes the answer, are in our piece on why banks decline commercial property loans.
The file we send is what an approval waits on.
We package an industrial purchase so a lender can read it in one pass. That pack is the contract, the lease and any side deed, trading figures where the buyer occupies, the valuation, the insurance, and the environmental report where the site history calls for one. What slows the file is usually a short remaining lease, a tenant the lender cannot get comfortable with, a valuation below the price, a specialised fitout with no obvious next user, or a report that arrives late. Each of those is a question the file has to answer. Answering it before the contract goes unconditional is what keeps a settlement date intact.
Businesses have been buying property in size. The ABS Lending Indicators for the June quarter 2026, released 14 August 2026, recorded $27.2 billion of business finance for property purchases, the highest quarter since the series began in 2002. We set that release out in our note on the business property lending record. A lender with a full book still has to get comfortable with this particular building, which is why the pack matters more than the headline volume.
Melbourne is a set of industrial precincts, and Australia is wider than one vacancy rate.
A warehouse in Melbourne is financed against its own precinct. Knight Frank's June quarter 2026 figures show the south-east with face rents up 9.4% over the year and incentives still at 23.3%. A headline rent and the rent a lender will count are different numbers once those incentives are taken out. Our page on commercial property finance in Melbourne's south-east goes through that corridor. For the wider city, where the story is yields, rents and vacancy, see our note on Melbourne commercial property. How industrial yields sit against retail, city by city, is in the June quarter 2026 comparison.
Nationally, CBRE's 3.2% vacancy figure is an average across cities that do not move together. A warehouse in Perth, where CBRE had vacancy at 1.0% in the same report, is a different leasing story from one in Melbourne at 4.7%. The loan still comes back to the lease on this building, the tenant who pays it, and the use the planning scheme allows. If you are weighing a purchase, our commercial property finance work is where we start with that file.
If you are buying a warehouse, talk to us before you exchange. Bring the lease and the contract, and we will tell you how a lender is likely to read them.
